New 995 Reversible Plow

Tillage

REQUEST A QUOTE

REQUEST A QUOTE

Key Features

Moldboard frame pivots with the bottoms
Plastic moldboard and steel shins
Landsides with wedges
Front gauge wheels

More Info

Expand All

Features

V-style mainframe distributes weight for good penetration

995 mainframe

The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

Moldboard frame pivots with the bottoms

Moldboard frame

All 995 Moldboard Plows use only one set of bottoms.

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

Requires less 3-point hitch capacity
Requires less ballasting of the tractor front end
Eliminates initial cost and service requirements for one complete set of standards and bottoms

Integral on-land hitch provides excellent maneuverability

Integral on-land hitch

The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

Category 3/3N Quik-Coupler compatible
Tractor rockshaft lever controls the raising and lowering of the plow
- Maximum plowing depth to 356 mm (14 in.)
Provides ample clearance between the tractor tires and the plow

Adjust front gauge wheels to limit plowing depth

Front gauge wheels

The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

Rear gauge wheels come in standard equipment

995 Moldboard Plow rear gauge wheels

Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

Equipped with 6.70-15 tires for good flotation
Easy turnbuckle adjustment on rear gauge wheel
Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)

Specifications

Compare >>>

Select up to 2 models to compare specifications

John Deere995 Reversible Plow

Add Model

Key Specs

Total width of cut

Option 1

2.3 m
7.5 ft

Option 2

2.7 m
9 ft

Option 3

3.2 m
10.5 ft

Option 4

3.7 m
12 ft

Plowing depth

35.6 cm
14 in.

Horsepower required - Option 1

5-bottom: 96.9-123 kW
130-165 hp

Option 2

6-bottom: 111.9-130.5 kW
150-175 hp

Option 3

7-bottom: 130.5-149.1 kW
175-200 hp

Option 4

8-bottom: 149.1-186.4 kW
200-250 hp

Hitch

Type

Category 3N or 3

Steering

Integral, in-furrow
No
Integral, on-land
Yes
Semi-integral, on-land
No
Drawn, in-furrow
No
Drawn, on-land
No
Quick-coupler compatible
Yes

Reversible

Type of reversing
Hydraulic cylinder
Yes

No. of bottoms

Option 1

Option 2

Option 3

Option 4

Option 5

Option 6

Option 7

Option 8

Total width of cut

Adjustment

Option 1

2.3 m
7.5 ft

Option 2

2.7 m
9 ft

Option 3

3.2 m
10.5 ft

Option 4

3.7 m
12 ft

Option 5

Option 6

Option 7

Option 8

Weight (approximate)

Option 1

1,678 kg
3,700 lb

Option 2

1,860 kg
4,100 lb

Option 3

2,041 kg
4,500 lb

Option 4

2,440 kg
5,368 lb

Option 5

Option 6

Option 7

Option 8

Clearances

Vertical

81.3 cm
32 in.

Fore-aft

Standards

Shearbolt

Standard

Safety trip

Optional

Spring reset

Hydraulic

Coulters

Option 1

Option 2

Option 3

Bottoms

Option 1

Plowing depth
35.6 cm
14 in.
Steel moldboard

Option 2

Plastic moldboard

Option 3

Option 4

Option 5

Option 6

Frame

Option 1

Thickness: 17.8x10.2x0.8 cm
7x4x0.313 in.

Option 2

Option 3

Expandable

Horsepower required

Option 1

5-bottom: 96.9-123 kW
130-165 hp

Option 2

6-bottom: 111.9-130.5 kW
150-175 hp

Option 3

7-bottom: 130.5-149.1 kW
175-200 hp

Option 4

8-bottom: 149.1-186.4 kW
200-250 hp

Expand All

Accessories and Attachments

Bottoms

Plastic Moldboard with Steel Shins and Hardware - BP16596

Steel shins

Steel shins are available as a field-installed option only.

The frog is pre-drilled at the factory to accept this attachment.

With this attachment, the steel shins will allow longer wear life when soil first comes into contact with the plow, but still offers the option of a plastic moldboard for sticky soil conditions.

Hydraulic Cylinder

Hydraulic Cylinder - BP16287

Landsides

Landsides - BP16597

Double landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Landsides - BP16603

Double landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Landsides and Wedges - BP16598

Landsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Landsides and Wedges - BP16604

Landsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Warning Lights and Emblem

SMV Security Emblem - BP16365

Warning Lights - BP16298

Wheels and Tires

Two Front Gauge Wheels with 6.70-15 In. Tires - BP16600

Front gauge wheel

Front gauge wheels can be added to control the plowing depth.

Can be adjusted to limit the plowing depth to 356 mm (14 in.)
Equipped with 6.70-15 tires

New 995 Reversible Plow

More Info

Features

Specifications

Accessories and Attachments

Bottoms

Hydraulic Cylinder

Landsides

Warning Lights and Emblem

Wheels and Tires

Loan Calculator

Request A Quote

Equipment

Promotions

Precision AG

Parts & Service

Other Links

Connect With Us

Search